VPC3+S

PROFIBUS-DP-V1/-V2 Slave Controller with serial Interface

  • function and software compatible to SPC3 from Siemens
  • SPI, I2C, parallel-Interface
  • LQFP 48pin or BGA 48pin Package 
  • 4kByte communication RAM
  • function and software compatible to VPC3+C
  • Supporting PROFIBUS-DP-V0, DP-V1 and DP-V2 protocol
  • HW - PLL für DP-V2 - ISOM
  • Ultra Low Power, Vcc 3.3V
  • Software stack and Evaluation-Kit

more information

VPC3+C

PROFIBUS DP-V1/-V2 Slave Controller

  • 100% compatible to SPC3 from Siemens
  • PROFIBUS-DP/DP-V1 / DP-V2 protocol handling in hardware
  • 4 KByte communication-RAM
  • 3.3V or 5V power supply
  • Low current consumption
  • PNO certified costumer applications
  • Package PQFP44
  • Software stack and Evaluation Kit available

Öffnet einen internen Link im aktuellen Fenstermore information

VPCLS2

PROFIBUS DP Lean Slave Controller

  • 100% compatible to LSPM2 from Siemens
  • PROFIBUS-DP protocol handling in hardware
  • 40 Bit I/O, 1 up to 3 Byte configurable as diagnostic inputs
  • 5V power supply
  • Maximum data transfer rate 12 Mbit/s
  • Package PQFP80
  • Asynchronous interface according to PROFIBUS-DP
  • Automatic recognition of data transfer rate
  • Evaluation Kit available

Öffnet einen internen Link im aktuellen Fenstermore information

MPI12x

MPI Controller / PROFIBUS-DP Slave

  • MPI communication up to 12Mbits/s
  • PROFIBUS-DP Slave incl. Clock Synchronisation
  • 4KByte integrated SRAM
  • Configurable 8 Bit µController interface
  • 3.3V power supply, 5V tolerant inputs
  • Package PQFP44
  • Software stack and Evaluation-Kit available

Öffnet einen internen Link im aktuellen Fenstermore information

SMC1000 SliceBus® Master controller

  • ARM926 core
  • PROFIBUS-Slave and PROFIBUS-Master interface
  • Ethernet (10/100) MACs
  • UARTs, CAN, SPI, I2C interfaces, USB 1.1 with PHY
  • 8/16bit asynchronous SRAM interface
  • MMC/SD Card controller, 8bit Flash controller
  • 16bit DDR-SDRAM controller
  • 608kB internal SRAM
  • PROFINET-RT, CANopen, PROFIBUS protocols supportet

SNAP+ - I/O Backplane Controller for high speed Remote I/O

Basic SliceBus backplane information:

  • Single master system
  • Up to 64 slave (Node) stations
  • Asynchronous, serial data transmission with 48 MBit/s over Point to Point LVDS physic
  • Additional alarm line for initialization and asynchronous event communications from node to master
  • Full system detection from SliceBus master without external information on module configuration

SNAP+ - I/O Backplane Controller for high speed Remote I/O

ANTAIOS Real-Time Communication Controller

  • 288 MHz ARM Cortex-A5 Processor
  • 2-port Ethernet interface with real-time switch & real-time Protocol Processing Units (PPU)
  • Gigabit Ethernet MAC
  • SPI/QSPI, USB 2.0, 2x CAN, 2x UART,
  • MMC/SD & DDR2 memory interfaces
  • PROFIBUS master & slave, SliceBus master
  • I²C interface
  • SRAM interface

Downloads

profichip Comparison Table